Steel Sheet Pile Resources

Steel Sheet Pile InformaTION and resources

The PDCA Steel Sheet Pile Committee, since its formation, has worked to bring information and resources on steel sheet pile to the driven pile industry. Below are multiple resources and guidance documents that are available for download.

 
FAQ Guide_Final

frequently asked questions (FAQ) Guide


The FAQ Guide provides an overview of general Steel Sheet Piling information, as indicated in the Table of Contents below:
  • General Introduction
  • What is Steel Sheet Piling designed for? And how readily available is it?
  • How is Sheet Piling installed? Is Noise & Vibration a concern?
  • How is Sheet Piling specified?
  • Will Steel Sheet Piling last? How does it compare of concrete lifespan?
  • Can Steel Sheet Piling carry structural loading?
  • Does Sheet Piling have any aesthetic appeal?
  • Is there a Green Aspect with Steel Sheet Piling use?
  • References
THE FAQ GUIDE IS AVAILABLE TO DOWNLOAD BY CLICKING HERE.
04_20_2023_ Basic Principles of Hammers for Sheet Pile Installation

basic principles of hammers for sheet pile installation


The Basic Principles of Hammers for Sheet Pile Installation document details the different hammer and press-in systems, gives specific technical details on their use, and provides methods of selection.

Additional resources, such as a simplified and full list of specifications for various hammers and press-in systems, as well as weblinks directly to the manufacturers websites, can be found on the Hammer Database page of the Technical Library, link below:  
The basic principles of hammers for sheet pile installtion guide is available to download by clicking HERE.
Sheet Piling Installation Guide

sheet piling installation guide


The Sheet Piling Installation Guide provides an introduction to the methods of installing steel sheet piling. It is based on the North American Steel Sheet Piling Association (NASSPA) manual on the installation of steel sheet piling. NASSPA ceased operations in 2010. PDCA has significantly updated the manual with current technology and latest equipment information. This guide will provide the following:
  • Description of the current practical information that should always be considered to ensure proper product installaion
  • Inventory of the various existing driving systems
  • Description of driving methods, ancillary equipment, and all necessary procedures
  • Common installation problems and specific aspects of driving
The Sheet Pile Installation Guide is available at no cost for PDCA Members or a nominal $80 for non-members through The PDCA Store.

Click the picture or HERE to download the guide. (PDCA members will need to log into the PDCA site to receive complimentary download.)
Sheet Piling Corrosion Guide

Steel sheet pile corrosion guide


Steel sheet piling has a long history of extended service in a variety of structures and environmental conditions. The determination of the life of a sheet pile structure is part of the design process, and regardless of the conditions can be selected to meet the requirements of the project. The durability of a steel sheet pile wall is not pre-determined by the site conditions, but rather a decision made by the engineer. The Steel Sheet Pile Corrosion Guide is intended to give a designer confidence in how to select a system that meets structural, economic and aesthetic requirements of a project. These tools allow the designer to choose from an enormous variety of combinations to enable the targeted design life to be achieved.

The Sheet Pile Corrosion Guide is available at no cost for PDCA Members or a nominal $50 for non-members through The PDCA Store.

Click the picture or HERE to download the guide. (PDCA members will need to log into the PDCA site to receive complimentary download.)
Retaining Wall Cost Comparision Guide

retaining wall cost comparison guide


The Retaining Wall Cost Comparison Guide compares the cost and duration of construction for steel pile walls, tangent walls, and secant walls. The guide details analysis models and procedures, results of the analysis, and the compares the cost & installation time for each wall type. The study was performed at the request of PDCA and with the help of Hartman Engineering and Richard Goettle Geotechnical Engineering and Construction.

The Retaining Wall Cost Comparison Guide is available at no cost for PDCA Members or a nominal $50 for non-members through The PDCA Store.

Click the picture or HERE to download the guide. (PDCA members will need to log into the PDCA site to receive complimentary download.)
Pile Driving Construction_Sheet Pile Corrosion Protection Guide

Pile driving construction: sheet pile corrosion protection


The Sheet Pile Corrosion Protection presentation is an introduction and resource to educate individuals on sheet piling and corrosion. The presentation includes the following details and information:
  • Corrosion: What it is and how it occurs
  • Available Coating Protection Methods 
  • Galvanization: When and Why
  • Cathodic Protection
  • Steel Grades and Impact of Corrosion / Sacrificial Thickness
  • Resistivity
THE sheet pile corrosion protection presentation IS AVAILABLE TO DOWNLOAD BY CLICKING HERE.
Steel Making Process_PDCA2023_Page_01

steel making process


The Steel Making Process presentation is an introduction and resource to educate individuals on how steel is made. 


Additional Resources:
  • Gerdau Steel Making Process Video
  • Nucor-Yamato Blytheville Steel Mill Tour Video
** The provided video links above were produced by the individual manufacturing companies and are not owned or maintained by PDCA. Any questions, comments, or concerns should be sent directly to the manufacturing company. ** 
 
Phone: 904-215-4771

Address: 33 Knight Boxx Road, Suite 1 Orange Park, FL 32065

Newsletter:

Sign up for our monthly newsletter and receive the latest from PDCA.

Download from the App Stores

Copyright © Pile Driving Contractors Association, 2024. All rights reserved.

Privacy Policy  |  Terms Of Use

Powered by BRYNK® Growth Platform